A little over a year ago, I had a project that required driving an RF single-pole double-throw (SPDT) coaxial switch either by transistor-transistor-logic (TTL) pulses sent by an external source or by a local pushbutton. To my surprise, I couldn't find a suitable circuit.
Many circuits used a "floating" SPST switch for control, so a TTL signal referenced to common ground couldn't be used. Also, the known J-and D flip-flops first needed to use an anti-glitch R-S circuit, making the design too complex.
So, I tried a simple circuit using a 7402 quadruple NOR gate (see the figure). It worked as expected. The only required addition was a 10-kΩ resistor connected in parallel with the marked 1-kΩ resistor. This asymmetry contributed to reliable operation. The switching speed is about 1 Hz. Designers can use smaller capacitors for faster operation.
This circuit took care of all of the project's requirements. We made several units, and they've operated without any problem for more than a year. The key was to use the same command input, the pushbutton switch, or an external TTL command sent through a long cable. The status LEDs send back the resultant setting. They also send the TTL command from a remote location and to the person sitting next to the unit.
The 1N4007 diodes protect the PVG 612 power optocouplers from kickback voltage generated across the RF SPDT switch coils when the current is interrupted.
Please refresh the page if you have trouble reading this text.
Search Electronic Design
Email Newsletter
Sponsored By:
Electronic Design UPDATE provides readers with late-breaking news, opinions from industry experts, and timely technology stories. It's a unique opportunity to get your product message in front of engineers, engineering managers, and corporate managers while they're reading about critical information online.
Reprints
