[Design View / Design Solution]
Rise Of Multiprocessing/Multithreading Sharpens Focus On Interrupts
Using multiprocessing and multithreading architectures in conjunction helps generate higher performance in a range of applications.
Potentially substantial performance gains from the use of multithreading and multiprocessing architectures have captured the attention of designers of consumer devices and other electronic products. Multithreading uses cycles when the processor would otherwise sit idle to process instructions from other threads. Multiprocessing, on the other hand, introduces additional independent processing elements in order to execute threads or applications concurrently. Embedded applications running in multiprocessor and multithreading architectures, just like those running in conventional applications, require interrupt service routines (ISRs) to handle interrupts generated by external events.
One key challenge for designers implementing these new technologies is avoiding the situation where one thread is interrupted while modifying a critical data structure, enabling a different thread to make other changes to the same structure. Conventional applications overcome this problem by briefly locking out interrupts while an ISR or system service modifies crucial data structures.
In a multithreaded or multiprocessing application, this approach isn't sufficient because of the potential for a switch to a different thread context (TC), or access by a different processing element that's not impeded by the interrupt lockout. A more comprehensive approach is required, such as disabling multithreading or halting other processing elements while the data structure is being modified.
IMPROVING PERFORMANCE Manufacturers of consumer devices and other embedded computing products are eagerly adding new features, such as Wi-Fi, VoIP, Bluetooth, and video. Historically, increased feature sets have been accommodated by ramping up the processor's clock speed. In the embedded space, this approach rapidly loses viability because most devices are already running up against power consumption and real-estate constraints that limit additional processor speed increases. Cycle-speed increases drive exponentially greater power consumption, making high cycle speeds unmanageable for more and more embedded applications.
In addition, processors are already so much faster than memory that more than half the cycles in many applications are spent waiting while the cache line is refilled. Each time there's a cache miss or another condition that requires off-chip memory access, the processor needs to load a cache line from memory, write those words into the cache, update the translation lookaside buffer (TLB), write the old cache line into memory, and resume the thread. MIPS Technologies stated that a high-end synthesizable core taking 25 cache misses per thousand instructions (a plausible value for multimedia code) could be stalled more than 50% of the time if it must wait 50 cycles for a cache fill.
MULTITHREADING APPROACH Multithreading solves this problem by using the cycles that the processor would otherwise waste while waiting for memory access. It can then handle multiple concurrent threads of program execution. When one thread stalls waiting for memory, another thread immediately presents itself to the processor to keep computing resources fully occupied.
Notably, conventional processors can't use this approach because it takes a large number of cycles to switch the TC from one to another. Multiple application threads must be immediately available and "ready-to-run" on a cycle-by-cycle basis for this approach to work. MIPS accommodates this requirement through its incorporation of multiple TCs, each of which can retain the context of a distinct application thread (Fig. 1).
In a multithreaded environment such as the MIPS 34K processor, performance can be substantially improved— when one thread waits for a memory access, another thread can use that processor cycle that would otherwise be wasted.
Figure 1 shows how multithreading can speed up an application. With just Thread0 running, only five out of 13 processor cycles are used for instruction execution and the rest are spent waiting for the word to be loaded into cache from memory. In this case, when using conventional processing, the efficiency is only 38%. Adding Thread1 makes it possible to use five additional processor cycles that were previously wasted. With 10 out of 13 processor cycles now used, efficiency improves to 77%, providing a 100% speedup over the base case. Adding Thread2 makes it possible to fully load the processor, executing instructions on 13 out of 13 cycles for 100% efficiency. This represents a 263% speedup when compared to the base case.
Reprints
