A power control device that protects against MOSFET burnout was designed using a well-known gated-oscillator circuit. The circuit prevents excessive On time for the MOSFETs beyond a permitted limit. The R1-C1 time constant forms a timing circuit that limits the On-time pulse period and automatically generates its own maximum permitted On/Off duty cycle (Fig. 1). Without this timing circuit, if the input remained high for any reason it would then generate a continuous On condition for the powerdriver MOSFETs.
R1 is a variable resistor that sets the desired oscillator frequency by keeping the input always On or in one state. Once the limit frequency or On/Off period is set, the circuit is ready for operation with any input signal. A longer zero level (or Off) at the input keeps the zero level intact at the output. However, a longer one level (or On) is prevented automatically (Fig. 2). C1 can be from 100 pF to 10 F, and R1 can vary from 1 k to 1 M .
Please refresh the page if you have trouble reading this text.
Search Electronic Design
Email Newsletter
Sponsored By:
The Find Power Products monthly newsletter brings you the most important new developments within the world of power design. The newsletter includes exerpts from industry leader Sam Davis's exclusive blog, as well as overviews of the latest new products.
Enter Email to Subscribe
Web Seminar
Sponsored By:
Title: Exploring How Good GUIs Drive Adoption in the Digital Power Management Space
Reprints
