The positive emitter-coupled logic (PECL) used in high-speed telecommunications requires odd supply voltages: a positive V_CC of +3.3 V, and a termination voltage (V_TT) equal to V_CC − 2 V = +1.3 V. The V_TT supply is regulated with respect to V_CC and must be able to sink current.

Most positive low-dropout (LDO) regulators can't sink current, but negative LDOs are designed for that purpose. Figure 1 shows a current-sinking negative LDO modified for positive-voltage operation. The GND pin connects to V_CC, and IN connects to ground. Those connections let the negative LDO operate as a positive-voltage sink in which the voltage at V_SET equals V_CC − 1.25 V:

V_SET = V_CC − 1.25 V
V_CC − V_SET = 1.25 V
[(V_CC − V_OUT)/(R1 + R2)]R2 = 1.25 V
V_OUT = V_CC − (R1 + R2)(1.25 V/R2)
V_OUT = V_TT = V_CC − 2 V (For PECL)
(R1 + R2)(1.25 V/R2) = 2 V (For PECL)
R1 = 0.6R2 (For PECL)

The output voltage is regulated with respect to V_CC. This feature is perfect for PECL-termination applications because it requires the output voltage to track the V_CC supply. Maximum output current is limited by the internal protection circuitry (to about 400 mA) and by the package power-dissipation rating (about 550 mW). For applications that require higher output voltage or higher current (or both), you can add series diodes to dissipate some of the power (Fig. 2). You can add as many diodes as needed to dissipate power, but the voltage at OUT (pin 5) must remain at least 300 mV above ground (IN, pin 2).

Reprints

Printer-Friendly

Email this Article

RSS

Submit PlanetEE del.icio.us Digg Reddit Newsvine StumbleUpon Netscape Yahoo MyWeb Live Bookmarks Fark  Submit

Font Size

What's This?

Network-On-Chip Tools Arrive for The Masses Tackling System Design Challenges Through Early Verification ESL Tools Take Center Stage As Designers Move Up Parasitic Extraction Tool Targets Next-Generation Custom ICs Synopsys Jumps Into ESL-Synthesis Pool Verify Control Systems Before Committing To Hardware You're Using How Many FPGAs? Tool Up For The FPGA Blitz

1) Build A Smart Battery Charger Using A Single-Transistor Circuit (176 views today) 2) Hot Hands For Some Cool Rock: Motion Sensing Meets Audio Engineering (167 views today) 3) What's All This Transimpedance Amplifier Stuff, Anyhow? (Part 1) (83 views today) 4) GPS-Derived Grandmaster Clock Delivers Ultra-Precise Time And Frequency Sync (73 views today) 5) Downconverting Mixers Lower Power Consumption While Improving Performance (59 views today) ALL TOP 20

POST YOUR COMMENTS HERE Name: Email:
Your Comments: Enter the text from the image below Please refresh the page if you have trouble reading this text.