Signal conditioning often consists of converting an analog signal from a sensor in the physical world into a digital signal that can be used for data collection, controlling a process, performing calculations, producing display readouts, and other purposes. Analog sensors measure many types of physical phenomena such as temperature, pressure, force, flow, motion, position, pH (acid/base), and light intensity. Sensor signals usually can’t be converted directly into digital data because their outputs are relatively small voltages, currents, or resistance changes that must be conditioned before being converted into digital data. Conditioning takes the form of amplifying, buffering, or scaling the analog signal to make it suitable for input to an analog-to-digital converter (ADC). That ADC then digitizes the signal and sends it to a microcontroller or other digital device for further data processing within the system. The key to making this chain work is selecting operational amplifiers that interface properly with the various types of sensors used in measurements. A designer must then pick an ADC that has the characteristics to process the signal from the input network and produce a digital output that satisfies the resolution, accuracy, and sampling rate of the data acquisition system.
Sensors—The Starting Point Sensors are classified according to the type of physical variable they measure: thermocouples, resistance temperature detectors (RTDs), and thermistors measure temperature; strain gages measure pressure or force; pH electrodes measure the acidity or alkalinity of a solution; and PIN photodiodes are used as photodetectors to measure light intensity. Sensors can be further classified as active or passive. An active sensor requires an external source of excitation (voltage or current), whereas a passive sensor generates its own electrical voltage without excitation. Common active sensors are RTDs, thermistors, and strain gages, while thermocouples and PIN diodes are passive sensors. To determine what specifications are necessary for the amplifier to interface with a sensor, a designer must consider the major sensor characteristics shown to the right…
In the PDF article, in section "D. The Final Stage - Analog to Digital Conversion", the chart lists the DC accuracy of the Delta-Sigma ADC as "Low". I thought the Delta-Sigmas could get much better resolution and accuracy than the multi-slope converters. Am I missing something?
Carl Van Wormer -August 12, 2004
Very good .
Hari Shanker gupta -April 02, 2004
Your Comments:
Enter the text from the image below
Please refresh the page if you have trouble reading this text.
Search Electronic Design
Email Newsletter
Sponsored By:
Electronic Design UPDATE provides readers with late-breaking news, opinions from industry experts, and timely technology stories. It's a unique opportunity to get your product message in front of engineers, engineering managers, and corporate managers while they're reading about critical information online.
Reprints
