Rather than waste months of engineering time on tricky applications with low to moderate production volumes—like digital X-ray equipment, digital telescopes, military imaging, and sonar and radar—try an off-the shelf analog-to-digital converter (ADC). Datel's ADSD-1410 dual, 14-bit, 10-MHz, sampling ADC features buffered outputs as well as two 30-MHz sample-and-hold amplifiers and two independently clocked, 14-bit, 10-Msample/s ADCs.
An ASIC provides timing and control logic so each converter can operate from a single, edge-triggered, start-convert pulse. This lets the two ADCs run independently at 10 MHz each, with alternating blocks of data continuously being clocked from the three-state output buffer at 20 MHz. Noise levels are 150 mVRMS, resulting in a 78-dB signal-to-noise ratio. Total harmonic distortion is 80 dB. The module operates from ±5- and +15-V rails and consumes 1.7 W.
In lots of 500, pricing is $482 for the commercial temperature range and $732 for the military temperature range. The 1410 comes in a ceramic, 28-pin double DIP.
Please refresh the page if you have trouble reading this text.
Search Electronic Design
Email Newsletter
Sponsored By:
Electronic Design UPDATE provides readers with late-breaking news, opinions from industry experts, and timely technology stories. It's a unique opportunity to get your product message in front of engineers, engineering managers, and corporate managers while they're reading about critical information online.
Reprints
