Many systems require a low-power supply in addition to the main supply. A typical example is when an analog front-end amplifier needs ±5 V, while the main digital circuitry requires +5 V only. For reasons of cost, inventory management, electromagnetic compatibility, and so on, a separate —5-V converter may not be appropriate. So, some means must be found to provide extra power rails from the main supply.
Implementing a step-down IC converter's switching action may derive one or more outputs, isolated or non-isolated, quasi-regulated or unregulated. Auxiliary output currents of 10% to 30% of the main output are quite possible.
Step-Down Waveforms A review of the waveforms found in a working step-down converter will identify the voltage and currents that may be used to generate additional outputs (Fig. 1).
At the LX pin, there's a switching-voltage waveform of amplitude:
Voltage across the main inductor, L1, during the power cycle (LX connected to VIN), is:
Please refresh the page if you have trouble reading this text.
Search Electronic Design
Email Newsletter
Sponsored By:
The Find Power Products monthly newsletter brings you the most important new developments within the world of power design. The newsletter includes exerpts from industry leader Sam Davis's exclusive blog, as well as overviews of the latest new products.
Enter Email to Subscribe
Web Seminar
Sponsored By:
Title: Exploring How Good GUIs Drive Adoption in the Digital Power Management Space
Reprints
