Need a High Speed USB serial link?
Then check out DLP Design’s module
based on the latest chip from Future Technology
Devices International (FTDI). The
DLP-USB1232H has a standard 18-pin
dual-inline package
(DIP) form factor.
The FTDI
FT2232H
is designed
to handle the
480-Mbit/s High
Speed USB specification,
allowing the system to handle transfers
up to 12 Mbaud, essentially being limited
by the RS-232 transfer rate. The chip can
handle bulk transfers, and it supports hardware
flow control.
DLP DESIGN
FTDI
See associated image