How would you develop a wireless product for the 60-GHz band—yes, 60
GHz? That's millimeter-wave territory. Services exist up there now, but building
60-GHz mm-wave gear isn't an everyday design challenge. Yet as we run out of
spectrum space in the lower bands, and we're just about there, more and more
designs will push into the outer limits of radio. Toshiba may have a solution.
Unlicensed products may be built and sold in
the 57- to 64-GHz band in the U.S. Transmitters up to 10 W may be used, and that's a
challenge in itself. The WirelessHD consortium of consumer electronics companies
plans to exploit that range for home-entertainment networking. New designs are a good fit
for that range, especially if you're looking for a
maximum data rate (greater than 1 Gbit/s) on
a wireless link and you can live with short
ranges of a few meters.
With most wireless designs today, you can
simply go and find a technology that fits your
application—like Wi-Fi, Bluetooth, and ZigBee.
Then, you can seek out the appropriate chip
sets or modules, and voila—a nearly instant
wireless product.
Made from gallium arsenide (GaAs), current 60-GHz circuits work well but are
very expensive. These chips also require separate integration with an antenna
and a synthesizer, not mentioning the additional discretes, wire bonding, and
ceramic substrates. Today, advances in standard CMOS processing make it possible
to create 60-GHz chips.
At June's VLSI Circuits Symposia in Kyoto, Japan, Toshiba announced a single-chip
CMOS 60-GHz receiver. It integrates an antenna, low-noise amplifier (LNA), mixer
with preamplifier, and a phase-locked loop (PLL) synthesizer on a 1.1- by 2.4-mm
die without pad area (see the figure). The
process technology is 90-nm CMOS.
Fully differential circuitry improves signal
quality as it achieves noise-resistant features
suited to mm-wave IC applications. Optimizing
the element structure and wiring minimizes
internal noise and contributes to stable operation. Because it's CMOS, it's far less expensive
than comparable GaAs circuits. Additionally, it
suits further integration with other functions.
While the chip isn't currently available, it
will be in the future. Toshiba is working to
improve the integration and the receiver performance. A CMOS transmitter is also being
developed. Stay tuned and get ready for mmwave fun and games.
Toshiba Corp.
www.toshiba.com