• Channels
Part Inventory
Go
 
powered by:

 
  • Quick Poll
What Social Networking site do you use the most?



VOTE VIEW RESULTS
Previous Polls

Premium Content

New Signal Chain Technical Papers from Texas Instruments:

 

 

 

Broadband Wireless Options


Louis E. Frenzel

November 15, 2004

Print
Reprints Comment Subscribe

Of course, several other routes can be taken to obtain wireless broadband speeds and services. For example, a few vendors offer standard Wi-Fi equipment that's been enhanced with higher transmit power, gain antennas, and mesh network options to form small broadband access systems. This has been done mostly in rural and suburban areas around the U.S. where no DSL or cable broadband options exist.

Take WinLink 1000 from Radwin Inc., for instance. It's a proprietary version of 802.11 with enhanced media-access controller (MAC) and physical-layer (PHY) features that helps overcome the range, capacity, and QoS limitations of the standard system. The WinLink 1000 offers point-to-point NLOS service-carrier-grade service in the unlicensed WLAN bands. Hot-spot and cellular operators can cut back-haul costs by over 50% when using this system for T1/E1 replacement.

Also, don't forget that broadband access is available through selected cell-phone systems. Those systems with GSM/GPRS/EDGE or cdma2000 EV-DO can get several hundred kilobits of speed on a laptop with available plug-in cards. In addition, forthcoming 3G WCDMA systems will offer even greater data rates to 2 Mbits/s when available. But with 3G systems so slow in coming, many wonder if 802.16e or 802.20 may actually reach the market sooner with a mobile high-speed access service.

Of course, several other routes can be taken to obtain wireless broadband speeds and services. For example, a few vendors offer standard Wi-Fi equipment that's been enhanced with higher transmit power, gain antennas, and mesh network options to form small broadband access systems. This has been done mostly in rural and suburban areas around the U.S. where no DSL or cable broadband options exist.

Take WinLink 1000 from Radwin Inc., for instance. It's a proprietary version of 802.11 with enhanced media-access controller (MAC) and physical-layer (PHY) features that helps overcome the range, capacity, and QoS limitations of the standard system. The WinLink 1000 offers point-to-point NLOS service-carrier-grade service in the unlicensed WLAN bands. Hot-spot and cellular operators can cut back-haul costs by over 50% when using this system for T1/E1 replacement.

Also, don't forget that broadband access is available through selected cell-phone systems. Those systems with GSM/GPRS/EDGE or cdma2000 EV-DO can get several hundred kilobits of speed on a laptop with available plug-in cards. In addition, forthcoming 3G WCDMA systems will offer even greater data rates to 2 Mbits/s when available. But with 3G systems so slow in coming, many wonder if 802.16e or 802.20 may actually reach the market sooner with a mobile high-speed access service.

Average (0 Ratings):

Subscribe
Subscribe to Electronic Design and start receiving more articles like this one
Filed Under:

Check for price and availability on Source ESB:

Go
powered by  
    There are no comments to display. Be the first one!
You must log on before posting a comment.

Are you a new visitor? Register Here
Acceptable Use Policy

Sponsored Links