• Channels
Part Inventory
Go
 
powered by:

 
  • Quick Poll
What Social Networking site do you use the most?



VOTE VIEW RESULTS
Previous Polls

Premium Content

New Signal Chain Technical Papers from Texas Instruments:

 

 

 

Miniature Dot Puts Memory On The Spot


Christine Hintze

July 19, 2006

Print
Reprints Comment Subscribe

A miniature wireless chip could soon transform everyday objects like passports and driver’s licenses into carriers of up to 4 Mbits of data.

The experimental chip, developed by the Memory Spot research team at HP Labs in Bristol, England, is about the size of a grain of rice (2 to 4 mm square) and can be embedded in a sheet of paper or stuck to any surface (see Figure 1). It incorporates a built-in antenna and is completely self-contained—with no need for a battery or external electronics.

The Memory Spot’s storage capacity ranges from 256 kbits/s to 4 Mbits/s, with a 10-Mbit/s data-transfer rate. Unlike a traditional RFID tag, the Memory Spot lets users read and write data. Information is accessed by a read-write device, which powers the chip through inductive coupling.

Howard Taub, HP vice president and associate director of HP Labs, said the company is exploring a range of consumer applications for the Memory Spot, including embedding a chip with a patient’s medical records onto a hospital wristband (see Figure 2).

While Memory Spot tags may not become available commercially for a couple of years, Taub told CNET that they could cost as little as $0.10 each. The prototypes, which were manufactured at 180 nm, cost approximately $1 each.

A miniature wireless chip could soon transform everyday objects like passports and driver’s licenses into carriers of up to 4 Mbits of data.

The experimental chip, developed by the Memory Spot research team at HP Labs in Bristol, England, is about the size of a grain of rice (2 to 4 mm square) and can be embedded in a sheet of paper or stuck to any surface (see Figure 1). It incorporates a built-in antenna and is completely self-contained—with no need for a battery or external electronics.

The Memory Spot’s storage capacity ranges from 256 kbits/s to 4 Mbits/s, with a 10-Mbit/s data-transfer rate. Unlike a traditional RFID tag, the Memory Spot lets users read and write data. Information is accessed by a read-write device, which powers the chip through inductive coupling.

Howard Taub, HP vice president and associate director of HP Labs, said the company is exploring a range of consumer applications for the Memory Spot, including embedding a chip with a patient’s medical records onto a hospital wristband (see Figure 2).

While Memory Spot tags may not become available commercially for a couple of years, Taub told CNET that they could cost as little as $0.10 each. The prototypes, which were manufactured at 180 nm, cost approximately $1 each.

Average (0 Ratings):

Subscribe
Subscribe to Electronic Design and start receiving more articles like this one
Filed Under:

Check for price and availability on Source ESB:

Go
powered by  
    There are no comments to display. Be the first one!
You must log on before posting a comment.

Are you a new visitor? Register Here
Acceptable Use Policy

Sponsored Links