32-bit Micro Platforms Target Embedded Developers

1 of Enlarge image

RX62N Demo Kit

RX62N architecture

Micrium uC/OS III

IAR power debugging

Renesas' 32-bit RX6000 line takes a step forward with tools and development kits for the Renesas RX621 series. Leading the expansion of the ecosystem is Renesas' RX62N Demo Kit (Fig. 1). The board includes a 96MHz RX62N microcontroller (Fig. 2) with Ethernet, CAN and USB support. The system comes bundled with Renesas's own High-Performance Embedded Workshop (HEW) IDE along with a full GNU toolchain. The free KPIT GNU Tools is based on the Eclipse IDE.

The RX line of microcontrollers targets the same space as microcontrollers like Arm's Cortex-M3 series. Renesas has a number of features that challenge the competition including floating point support. It also has single cycle flash memory allowing the processor to run at speeds up to 100MHz with no wait states. The series supports flash sizes up to 2 Mbytes and 128 Kbytes of RAM. The demo board chip has 512 Kbytes for flash plus 32 Kbytes of data flash and 96 Kbytes of RAM. The typical complement of microcontroller peripherals includes 6 serial channels, I²C, CAN, and 2 SPI ports. On the analog side, the chip has an 8-channel 12-bit ADC and a 2-channel 10-bit DAC. The former can also be used as two 4-channel 10-bit ADCs. The CRC engine can come in handy as well.

On-board debug support uses SEGGER J-Link Lite emulator. The board also works with Total Phase's Beagle I²C/SPI Protocol Analyzer.

The board has a number of interesting peripherals. Analog Devices’ ADXL345 digital iMEMS three-axis accelerometer for motion measurement. Other Analog Devices chips include the I²C ADT7420 serial digital temperature sensor and the ADMP401 digital iMEMS microphone. There is a 128 Mbit serial phase change memory from Micron Technology. The Ethernet PHY is National Semiconductor’s DP83640 10/100 Ethernet PHY with IEEE 1588 support. The 96 x 64-pixel, white LED backlit graphics LCD was supplied by Okaya.