By Mark Downing, December 27, 2011
Connecting anything that can be monitored or controlled to the Internet is called the Internet of Things. Wireless is the preferred link.
By Louis E. Frenzel, January 23, 2012
A tutorial on the most common digital modulation techniques used in both wireless and wired communications and how they compare to one another in spectral efficiency with relevant examples.
By Paul Whytock, January 26, 2012
The debate on whether long-term exposure to Wi-Fi is a serious health risk has surfaced again.
By Staff, January 26, 2012
U.K. telecoms regulator Ofcom has set out new proposals for 4G mobile spectrum, including measures to extend coverage to at least 98% of the U.K. population.
Avago’s MGA-43128 high-gain, high-linearity power amplifier (PA) targets high-data-rate applications in 700- to 800-MHz cellular infrastructure equipment.
U.K. Prime Minister David Cameron visited industrial short-range radio company LPRS to congratulate it on its success.
By Staff, January 31, 2012
The AFEM-S105 front-end module (FEM) for Wi-Fi access points integrates a power amplifier, directional coupler, and SPDT antenna switch in a 3.2 mm x 3.2 mm x 0.6 mm package.
By William Wong, January 25, 2012
Not everything was on display on the main floor at CES 2012. The real action was behind the scenes and we have a lot of it on Engineering TV.
By Louis E. Frenzel, January 31, 2012
Single-chip zero IF receiver covers wide frequency range for SDR applications.
By Staff, January 05, 2012
Electronic Design's annual Technology Forecast takes a look at what's coming for communications in 2012.
By Staff, January 30, 2012
The LTC5585 direct conversion I/Q demodulator specifies a linearity performance of IIP3 = 25.7 dBm and IIP2 = 60dBm at 1.95 GHz.
For use in DSP-, FPGA-, and MCU-based systems, the CMX7861 analog front end combines codec, embedded signal processing, and auxiliary system support for interfacing between analog and digital systems.
Presented By Maxim
Presented By Datatronics
Presented By Micropower