By Al Lesko, October 04, 2011
Agilent's Al Lesko provides some guidance for proper implementation of an electronic functional-test system in the automotive market.
By David Maliniak, October 04, 2011
The more our vehicles can do, the harder they are to test thoroughly. Here's a look at the pressing issues in automotive test and how to approach a modern test methodology.
By David Maliniak, August 17, 2011
Test in a cabled environment might have been good enough for 2G and even 3G, but 4G/LTE demands over-the-air (OTA) test. Learn more about equipment and methodologies for this emerging test requirement.
By David Maliniak, September 30, 2009
Adding to the high and low ends of its spectrum-analyzer family at the same time, Agilent has covered the bases with the launches of its N9000A CXA low-cost analyzers and its N9030A PXA high-end instrument.
By Staff, January 18, 2005
Based on an open architecture that allows individual function modules to be added as needed, the Modula EMC test system offers a cost-effective approach to EMC testing. The system meets all IEC/EN testing standards. Standard functions include the
By Staff, April 01, 2003
Designed for performing transient immunity tests, the UCS500M/6B simulator includes burst, surge, power fail, and optional built-in ESD and Ringwave test modules all in one system. The simulator is capable of testing to IEC 61000-4-2, 4-4, 4-5, 4-8,
By Staff, November 01, 2002
An EMI measuring receiver fully compliant with CISPR 16 part 1 (International Special Committee on Radio Interference), the SMR4518 spans the range of 9 kHz to 18 GHz. Targeted for use by EMC testing laboratories and military and automotive standards
By Staff, October 01, 2002
A new high-power RF amplifier for EMC applications is a self-contained, air-cooled, solid-state amplifier with a modular design created for easy upgrades. The Model 3000W1000 targets applications in which immediate bandwidth and high gain are crucial.
By Staff, March 01, 2001
Suitable for use in performing EMC susceptibility tests, including immunity to conducted and radiated RF interference, the CBA series of Class A amplifiers is available in frequencies from 100 kHz to 1 GHz. Claiming excellent linear power output, the
By Staff, December 01, 2000
The PNW 2053B pulse generator and the CDN 141 coupling unit combination are designed as plug-in modules for the company's System 2050 modular EMC test system. The pulse generator is pre-programmed with the corresponding parameter settings for the FCC
Equipped with instrumentation for making measurements and conducting ESD audits according to ANSI/ESD S20.20 Static Control Program Standard, the PSK-310 ESD System Analysis Kit includes a variety of instruments such as a field meter, static decay
By Staff, November 01, 2000
Model 212 digital static meter features a chopper stabilized sensor for long-term, accurate measurements in both normal and ionized environments. It has a 3.5-digit LCD and a recorder output jack. The measurement range is from 0 to ±20 kV at a
Presented By Maxim
Presented By Datatronics
Presented By Micropower