Electronicdesign 8121 Wtdnrzpampromo
Electronicdesign 8121 Wtdnrzpampromo
Electronicdesign 8121 Wtdnrzpampromo
Electronicdesign 8121 Wtdnrzpampromo
Electronicdesign 8121 Wtdnrzpampromo

What’s the Difference Between NRZ and PAM?

June 8, 2015
PAM-4 may be to used to reach 400-Gb/s Ethernet, as well as being a good fit for other high-speed serial interfaces like Fibre Channel. So what’s the difference between the usual non-return to zero (NRZ) and pulse amplitude modulation (PAM)?

This is part of the  Communication Series: What’s the Difference: Serial Communications 101

Download this article in .PDF format

PAM-4, which could be a catalyst for reaching 400-Gb/s Ethernet, will also likely find homes in high-speed serial interfaces such as FibreChannel. Pulse amplitude modulation (PAM) is a way to pack more bits into the same amount of time on a serial channel.

The usual mechanism used in serial communications is the binary non-return to zero (NRZ). NRZ tracks the values being sent; therefore, an idle state, where all the bits are the same value, leaves the signal at the same level during the idle time (Fig. 1). NRZ differs from return to zero (RZ), which transitions to the 0 level for each bit. RZ is self-clocking, but it requires more bandwidth.

An alternative to NRZ is NRZ Inverted (NRZI), in which a 1 bit is indicated by a transition from one level to another. An idle using a 1 value will result in the signal cycling each bit.

NRZ and NRZI aren’t inherently self-clocking, but there are ways to address this issue. One is to use bit stuffing, which forces a transition after a set number of bits. Another approach is to only allow particular patterns that will have sufficient transitions to maintain an accurate clock at the receiver. Manchester encoding is one example of the latter. Ethernet, for instance, employs an 8B/10B Manchester code that encodes 8 bits of data using 10-bit codes. The 10-bit codes are chosen to give the data characteristics necessary for clock recovery from the data.

Encoding more data into the same timeframe can be done using different signaling levels. Such multi-level signaling (MLS) or pulse amplitude modulation (PAM) can have multiple distinct levels. Actually, NRZ is a two-level MLS or PAM-2 system. PAM-4 (Fig. 2) has four distinct levels to encode two bits of data, essentially doubling the bandwidth of a connection.

Of course, there’s no such thing as a free lunch. Generating or decoding more than two levels is typically more difficult, and often requires better or more complex hardware. Likewise, for high-speed signals, random and induced noise becomes a significant factor. The approach begins to pay off when there’s an escalation in cabling costs. That’s the hope anyway when it comes to 400 Gigabit Ethernet, which will likely employ eight PAM-4 connections running at 28 GHz.

Read more in this Communication Series: What’s the Difference: Serial Communications 101

Download this article in .PDF format

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!