Archive

Fingerprint Recognition Gets Thinner And Easier To Integrate

Feb. 5, 2001

Industry and legal authorities alike accept biometric authentication as an identification technology. It's easy to use, and more importantly, it's getting easier to integrate it into embedded systems. Two examples of this technology, Ethentica's...

William G. Wong

The TactileSense T-FPM makes use of a pol-ymer-based sensor to recognize a finger's print and electrical field (see the figure). This prevents aliasing via a latent image or a fingerprint replica. Also, its four-level power-management system has a snooze mode, capable of finger detection, that consumes an average of 12 mA. The module's operating temperature ranges from 0°C to 50°C. Measuring only 5.32 mm high, it weighs just 0.6 oz. Its active image area measures 0.77 by 0.56 in. with a 403-dot/in. resolution. This 2.62- by 1.57-in. device contains a microprocessor for recognition tasks and interfaces to other devices using a serial link or a Universal Serial Bus (USB) connection as well.

Prices range from $20 to $30 each, de-pending on quantity. A TactileSense T-FPM de-velopment kit, which costs $399, includes two sensor modules as well as extra hardware and software.

Meanwhile, the FPS200 fingerprint sensor's ImageSeek technology provides accurate readings even when fingers are wet. This 1.4-mm high sensor has an active image area of 12.8 by 15 mm with 500-dot/in. resolution. It integrates a microcontroller, an 8-bit analog-to-digital converter (ADC), and USB, MCU, and SPI mode communications. A multilevel power-management system supports an automatic finger-detect mode. Operating current is 35 mA, and its standby mode uses only 0.2 mA. While the FPS200 extracts positional fingerprint information for recognition, it does not store the image of the fingerprint itself.

The FPS200 developer's kit includes the 5thSense Personal Authenticator Peripheral, which incorporates an FPS200. Five FPS200 fingerprint sensors are included, along with development software, documentation, and additional hardware.

Pricing information for the FPS200 and the Developer's Kit is available from the company.

Ethentica Inc., 100 North Pointe Dr., Lake Forest, CA 92630; (949) 837-5353; fax (949) 837-5355; www.ethentica.com.

Veridicom Inc., 2040 Martin Ave., Santa Clara, CA 95050; (408) 565-6000; fax (408) 565-6020; www.veridicom.com.

About the Author

William G. Wong | Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form.

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below.

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence.