Yokogawa Test & Measurement released the DL950 ScopeCorder to improve efficiency and effectiveness in design and evaluation of renewable and energy efficient technologies. A combination of a multi-channel, mixed-signal oscilloscope and portable data acquisition recorder, the DL950 ScopeCorder captures both high-speed transient events and long-term trends. The DL950 ScopeCorder handles larger amounts of data at a faster sample rate and with a longer recording time. The DL950 can simultaneously measureme a wide variety of mechanical parameters.
Increasing electronic system complexity has resulted in the need to measure a wide range of input signals at fast sampling speeds over lengthy periods. Engineers must often resort to using multiple test instruments to measure several signals under different conditions. That adds complexities with data synchronization, management of multiple data formats and storage locations, and the inability to view all signals in one instrument. Design and test engineers deal with a broad variety of signals such as voltage, current, temperature, vibration, acceleration, strain, and other electro-mechanical and physical phenomena.
Over 20 types of isolated input modules provides engineers the freedom and flexibility to mix and match input types as required by the application. The DL950 is equipped with eight modular slots, for up to 128 channels of measurement data, allowing engineers the ability to synchronize measurements of different types with one common instrument. Up to five DL950 units can be connected for the analysis of correlations among data. Via the IEEE1588 high-precision time synchronization, the DL950 achieves accurate synchronized measurement in conjunction with other instruments.
For further information on the DL950 ScopeCorder, please visit: https://tmi.yokogawa.com/us/solutions/products/data-acquisition-equipment/high-speed-data-acquisition/dl950/
