Cabling Handles High Frequency in Small Form Factor

Sept. 11, 2024

Molex’s compact Cardinal line of cable assemblies work with frequencies up to 110 GHz.

If you have electronics, then there are wires either on printed circuit boards or in cabling. When it comes to high-frequency cabling, it can be a challenge when trying to keep the size to a minimum.

Molex’s Cardinal cable assemblies target this space, taking on frequencies up to 110 GHz with a 1-mm connector. They feature low attenuation and tight impedance tolerances (see figure). Stephen McGeary, Strategic Product Manager in Molex’s RF Business Unit, presented an introduction to the Cardinal family (see the video above).

Molex’s Cardinal cable assemblies can handle frequencies up to 110 GHz.

The Cardinal family is often used in test-and-measurement applications as well as 5G and other wireless applications. The phase-stable, low-loss cables are also available in 2.4-, 3.5-, and 1.85-mm plug and jack configurations.

Links

Communication

Latest RF and Microwaves Tech @ IMS 2024

Check out the latest technology at this year's International Microwave Symposium.

Systems

TechXchange: Critical Connections: Cables, Wires, Vias, and Busbars

Cables, wires, vias, and busbars provide critical connections in electronic systems

About the Author

William G. Wong | Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form.

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below.

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence.