25-MHz 8051 Crams Flash, ADC, And Timers Into 9-mm2 MLP

Nov. 19, 2001
The 8051 is alive and well. Cygnal Integrated Products has crammed a 25-MHz 8051 core, 8 kbytes of flash, and 256 bytes of data RAM into a tiny 11-pin, 3- by 3-mm (9 mm2) micro-lead package (MLP). Chip peripherals include a 500-ksample/s...

The 8051 is alive and well. Cygnal Integrated Products has crammed a 25-MHz 8051 core, 8 kbytes of flash, and 256 bytes of data RAM into a tiny 11-pin, 3- by 3-mm (9 mm2) micro-lead package (MLP). Chip peripherals include a 500-ksample/s 8-bit analog-to-digital converter with an integrated temperature sensor, as well as three 8-bit general-purpose and three 16-bit counter/timers. The C8051F300's footprint is 13 times smaller than a conventional 8051 with similar features.

And there's more. Additional peripherals for the C8051F300 include a 5-V-tolerant eight-port I/O, enhanced UART and SMBus serial ports, a 16-bit programmable counter array (PCA) with three capture/compare modules, a real-time PCA clock, and an external clock. The internal 25-MHz clock, which supports the UART, is accurate to within 2%. An external oscillator, say 32 kHz, can also be used for low-power operation.

The analog-to-digital converter (ADC) has eight external inputs and an amplifier with programmable gains of 4, 2, 1, and 0.5. The low-current 0.3-µA comparator has programmable hysteresis and response time that can be a Wake-up or Reset source. Unlike most 8-bitters, this microcontroller implements on-chip debugging with breakpoints, single-stepping, and watch points. Users can Inspect/Modify memory, registers, and the stack.

Designed for low-power operation, the chip uses 2.7- to 3.6-V supplies and typically draws 5 mA of operating current at 25 MHz. Prices start at $3.83 each in 1000-piece quantities. A development kit is available for $99. The chip and kit are both available now.

Cygnal Integrated Products Inc., 4301 Westbank Dr., Bldg. B, Suite 100, Austin, TX 78746; (512) 327-7088; www.cygnal.net.

Sponsored Recommendations

The Importance of PCB Design in Consumer Products

April 25, 2024
Explore the importance of PCB design and how Fusion 360 can help your team react to evolving consumer demands.

PCB Design Mastery for Assembly & Fabrication

April 25, 2024
This guide explores PCB circuit board design, focusing on both Design For Assembly (DFA) and Design For Fabrication (DFab) perspectives.

What is Design Rule Checking in PCBs?

April 25, 2024
Explore the importance of Design Rule Checking (DRC) in manufacturing and how Autodesk Fusion 360 enhances the process.

Unlocking the Power of IoT Integration for Elevated PCB Designs

April 25, 2024
What does it take to add IoT into your product? What advantages does IoT have in PCB related projects? Read to find answers to your IoT design questions.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!