SiC MOSFETs Help Power Japan's Growing Solar Energy Infrastructure

Sept. 24, 2014
Cree, Inc. announced that its C2MT, 1200V, 80mWxx SiC MOSFETs have been selected by Sanix Corporation, Japan, to be designed into their new 9.9kW three-phase solar inverters for use in the construction of commercial photovoltaic systems in the fast-growing Japanese solar energy market.

Cree, Inc. announced that its C2MT, 1200V, 80mWxx SiC MOSFETs have been selected by Sanix Corporation, Japan, to be designed into their new 9.9kW three-phase solar inverters for use in the construction of commercial photovoltaic systems in the fast-growing Japanese solar energy market.

"Through this partnership with Cree and their SiC technology, Sanix is able to capture more market share in the competitive Japan solar market," said Hiroshi Soga, general manager, Sanix Incorporated. "Cree's silicon carbide MOSFETs were critical for Sanix to meet our efficiency and thermal design targets. SiC switches reduced losses in our inverter electronics by more than 30 percent versus the silicon super-junction MOSFETs we were considering. In addition to providing a large efficiency gain, Cree's latest generation C2M SiC MOSFETs were priced competitively, making it possible to replace lower voltage, less rugged, and less efficient silicon MOSFETs."

Utilized in the primary power conversion stage of the solar inverter, Cree's 1200V C2M0080120D MOSFETs feature faster switching characteristics and up to one-third the switching losses of comparably-rated 900V silicon super-junction MOSFETs. By significantly reducing switching losses, Cree's SiC MOSFETs enable lower total system energy losses, higher frequency switching, and cooler operating temperatures. These benefits improve conversion efficiency and reduce the system's size, weight, complexity, and thermal management requirements. At the system level, performance is improved, cost is decreased, and lifetime of the inverter is extended.

Demonstrated to achieve up to three times the power density of typical silicon technology, Cree's C2M family of SiC MOSFETs are available in 1200V and 1700V, ranging from 1Wxx to 25 mWxx. C2M MOSFETs have been designed into a range of industrial power applications since their March 2013 market introduction and continue to experience increasing demand. Cree is currently delivering production volumes of SiC MOSFETs to Sanix and other PV inverter manufacturers, as well as to makers of industrial power supplies, auxiliary power converters, battery chargers, and motor drives.

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!