Five tips for power integrity measurements

Sept. 28, 2020

Challenging power integrity measurements can be performed quickly and accurately with this helpful guide.

Power rail measurements are necessary to meet the decreasing tolerances for power voltages of modern electronic devices. Such tests require the right equipment as well as a few tricks to obtain the best measurement result. This guide helps you find the right oscilloscope, probing solution and measurement settings for reliable power integrity testing.

Continue Reading

Solving the contact resistance challenge for 7nm and beyond CMOS

Flash Memory Takes Over

A Deep Dive into Audio Jack Switches and Configurations

The audio jack is an industry-standard connector that has many potential uses in addition to providing basic audio connectivity.

What is the Most Effective Way to Commutate a BLDC Motor?

Brushless direct current electric motors, or BLDC motors for short, are electronically commutated motors powered by a dc electric source via an external motor controller. Unlike...

MEMS versus ECM: Comparing Microphone Technologies

Increasing numbers of devices utilize microphones to capture sound. Two of the most commonly used microphone technologies are MEMS and ECM.

A Designer's Guide to Lithium (Li-ion) Battery Charging

This designer's guide helps you discover how you can safely and rapidly charge lithium (LI-ion) batteries to 20%-70% capacity in about 20-30 minutes.