Analyzing Automotive Radar Signals with an Oscilloscope

June 20, 2022

Every radar component and its integration into the vehicle must be rigorously tested to ensure reliable operation. This eGuide describes how to measure and calibrate radar sensors using a high performance, class-leading oscilloscope.

Download this free eGuide on an ideal lab setup, the radar signal channel analysis, the triggering and demodulation as well as the phase-measurements in multi-channels and the debugging of correlated radar signals.

This content is sponsored by:

Continue Reading

Solving the contact resistance challenge for 7nm and beyond CMOS

Using Resistors for Current Sensing: It’s More Than Just I = V/R

Powering next-generation ADAS processors with TI Functional Safety-Compliant buck regulators

The TPS62883-Q1 buck converter delivers up to 30A, supports stackable architectures for over 100A, and meets ASIL D functional safety standards for ADAS. Its high accuracy, flexible...

Altech Disconnect Switches

This video shows you how Altech's Disconnect Switches works.

LTC4286 Positive Hot Swap Controller

ADI's LTC4286 is an integrated solution for hot-swap applications allowing a board to be safely inserted and removed from a live backplane.

How sensor fusion is driving vehicle autonomy forward

As ADAS technology extends to critical, time-sensitive applications such as emergency braking, front-collision warning and avoidance, and blind-spot detection combining data...