Demodulator Enhances Receiver Performance

Jan. 30, 2012
The LTC5585 direct conversion I/Q demodulator specifies a linearity performance of IIP3 = 25.7 dBm and IIP2 = 60dBm at 1.95 GHz.

The LTC5585 direct conversion I/Q demodulator specifies a linearity performance of IIP3 = 25.7 dBm and IIP2 = 60dBm at 1.95 GHz. It is capable of a baseband output demodulation bandwidth of over 530 MHz, which can support wideband LTE multimode and digital pre-distortion receivers’ bandwidth requirements. The demodulator operates over a wide frequency range from 700 MHz to 3 GHz. The device provides two built-in calibration features. One is advanced circuitry that enables the system designer to optimize the receiver’s IIP2 performance, increasing from a nominal 60 dBm to 80 dBm or higher. The other is on-chip circuitry to null out the DC offset voltages at the I and Q outputs. Both serve to enhance receiver performance. The LTC5585 is priced starting at $5.98 each/1,000. LINEAR TECHNOLOGY CORP., Milpitas, CA. (800) 454-6327.

About the Author

Staff

Articles, galleries, and recent work by members of Electronic Design's editorial staff.

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!