IPC, SEMI Release November Results
December 28, 2012. North America-based manufacturers of semiconductor equipment posted a book-to-bill ratio of 0.79, according to SEMI's November Book-to-Bill Report. And IPC—Association Connecting Electronics Industries reported that the North American combined (rigid and flex) printed-circuit-board industry book-to-bill ratio in November declined to 0.93.
SEMI said the three-month average of worldwide bookings in November 2012 was $720.4 million. The bookings figure is 3.0% lower than the revised October 2012 level of $742.8 million and is 26.3% lower than the November 2011 order level of $977.2 million.
The three-month average of worldwide billings in November 2012 was $911.9 million, SEMI reported, adding that the billings figure is 7.5% lower than the revised October 2012 level of $985.5 million and is 22.5% less than the November 2011 billings level of $1.18 billion.
“Economic headwinds, higher chip inventory levels, and soft PC demand are among the factors tempering chip makers’ investment in additional manufacturing capacity,” said Denny McGuirk, president and CEO of SEMI. “Softening in the market for new semiconductor manufacturing equipment has persisted through the second half of 2012, and the November equipment billings are at a three-year low.”
The SEMI book-to-bill is a ratio of three-month moving averages of worldwide bookings and billings for North American-based semiconductor equipment manufacturers.
PCB Book-to-Bill
IPC announced the November findings from its monthly North American Printed Circuit Board (PCB) Statistical Program. The organization reported that rigid PCB shipments were down 5.4% in November from November 2011, and bookings decreased 8.7% year over year. Year to date, rigid PCB shipments declined 4.5%, and bookings decreased 0.9%. Compared to the previous month, rigid PCB shipments were down 5.6% and rigid bookings fell 2.1%. The book-to-bill ratio for the North American rigid PCB industry in November 2012 fell to 0.95.
Flexible circuit shipments in November 2012 were up 18.0%, and bookings were down 21.6% compared to November 2011. Year to date, flexible-circuit shipments decreased 2.2%, and bookings decreased 11.5%. Compared to the previous month, flexible circuit shipments increased 10.2% and flex bookings were up 9.9%. The North American flexible circuit book-to-bill ratio remained at 0.74.
For rigid PCBs and flexible circuits combined, industry shipments in November 2012 were down 3.5% and bookings decreased 9.9%, compared to November 2011. Year to date, combined industry shipments were down 4.3% and bookings were down 1.9%. Compared to the previous month, combined industry shipments for November 2012 decreased 4.2% and bookings decreased 1.3%. The combined (rigid and flex) industry book-to-bill ratio in November 2012 declined to 0.93.
“Once again, the bright spot in North American PCB sales was in the flexible circuit segment,” said Sharon Starr, IPC director of market research. “Orders were weak in both rigid and flex segments of the industry, however, putting downward pressure on the book-to-bill ratio. Lower bookings portend a slow first quarter in 2013.”
IPC book-to-bill ratios are calculated by dividing the value of orders booked over the past three months by the value of sales billed during the same period from companies in IPC’s survey sample. A ratio of more than 1.00 suggests that current demand is ahead of supply, which is a positive indicator for sales growth over the next two to three months.
Book-to-bill ratios and growth rates for rigid PCBs and flexible circuits combined are heavily affected by the rigid PCB segment. Rigid PCBs represent an estimated 90% of the current PCB industry in North America, according to IPC’s World PCB Production Report.
IPC’s monthly survey of the North American PCB industry tracks bookings and shipments from U.S. and Canadian facilities, which provide indicators of regional demand. These numbers do not measure U.S. and Canadian PCB production. To track regional production trends, IPC asks survey participants for the percent of their reported shipments that were produced domestically (that is, in the USA or Canada). In November 2012, 84% of total PCB shipments reported by survey participants were domestically produced. Domestic production accounted for 84% of rigid PCB and 87% of flexible circuit shipments in November by IPC’s survey participants. These numbers are significantly affected by the mix of companies in IPC’s survey sample, which change slightly in January, but are kept constant through the remainder of the year.
IPC said flexible circuit sales typically include value-added services such as assembly in addition to the bare flexible circuits. In November, the flexible circuit manufacturers in IPC’s survey sample indicated that bare circuits accounted for about 49% of their shipment value reported for the month. Assembly and other services make up a large and growing segment of flexible circuit producers’ businesses. This figure is also sensitive to changes in the survey sample, which may occur at the beginning of each calendar year.
Year-on-year and year-to-date growth rates provide the most meaningful view of industry growth, IPC said, adding that month-to-month comparisons should be made with caution as they may reflect cyclical effects and short-term volatility. Because bookings tend to be more volatile than shipments, changes in the book-to-bill ratios from month to month may not be significant unless a trend of more than three consecutive months is apparent. It is also important to consider changes in bookings and shipments to understand what is driving changes in the book-to-bill ratio.
See related article, “Forecasts and results indicate persistent economic weakness.”