Rohde & Schwarz validates high-power RF conformance tests
Munich, Germany. In the United States, spectrum has been made available for a nationwide LTE-based public safety network. The First Responder Network Authority (FirstNet) plans to deploy, maintain, and service this LTE band 14 public safety network for first responders such as police, firefighters, and emergency medical personnel.
PTCRB issued a request for test (RFT 118) for higher output power test cases at +31 dBm to verify transmitter performance of user equipment intended for operation in LTE FDD band 14. The high output power helps to extend coverage since commercial LTE devices can only transmit at a maximum power of +23 dBm.
At the recent PVG #73 meeting in Munich, Rohde & Schwarz validated all six test cases in RFT 118, becoming the first provider of test equipment for the now active HPUE certification requirement.
To validate the test cases, the R&S TS8980 RF conformance test system from Rohde & Schwarz emulates an LTE band 14 network in which the LTE-capable HPUE can register. The test system then runs through all required transmitter tests to verify user equipment performance at the high output power of +31 dBm. The test cases also prove that these devices do not interfere with any commercial LTE networks that are using frequencies adjacent to band 14.
Rohde & Schwarz has supported the testing of LTE HPUE for public safety destined devices since 2014. At Mobile World Congress 2014, the company demonstrated the world’s first HPUE transmitter performance tests using the R&S CMW500 wideband radio communication tester. In addition to supporting HPUE, the R&S CMW500 also supports other public safety related features such as LTE device-to-device (D2D) direct communication.
