Maxim Integrated Products introduces the MAX5974, a high-frequency, current-mode PWM controller with an active-clamp architecture and spread-spectrum operation.
Maxim Integrated Products introduces the MAX5974, a high-frequency, current-mode PWM controller with an active-clamp architecture and spread-spectrum operation. The device's active-clamp topology delivers better than 90% efficiency, thus reducing power consumption in synchronous forward/flyback power supplies targeting IEEE 802.3af/at power devices (PDs).
The MAX5974A/MAX5974C versions are well suited for universal rectified offline (85 to 265 V) or telecom (36 to 72 V) input voltages. The MAX5974B/MAX5974D also accommodate input voltages as low as 10.5 V (e.g., wall adapters). Targeted applications include PoE PDs such as IP phones, IP cameras, and wireless LAN access nodes. The MAX5974 is also well suited for universal and telecom input ranges.
The MAX5974A/MAX5974B contain an internal sample-and-hold error amplifier that regulates the output voltage through a coupled inductor. This feedback configuration saves space and cost by eliminating the need for a shunt regulator, optocoupler, and tertiary winding for the bias circuit. Applications requiring optocoupler feedback can use the MAX5974C/MAX5974D, which have a continuously connected feedback input.
The device's switching frequency is adjustable from 100 to 600 kHz and is trimmed to provide ± 8% accuracy. This allows designers to optimize the magnetics and filter elements used in the circuit to meet EMI requirements. The duty cycle can be programmed up to 80% of the maximum duty-cycle limit.
Additional features include an enable input to shutdown the device and programmable soft-start to eliminate output-voltage overshoot. The MAX5974A/MAX5974C have an internal bootstrap ULVO with high hysteresis that requires 20 V for startup; the MAX5974B/MAX5947D require 10 V for startup.
Rated for operation over the -40° to 85° C extended temperature range, the MAX5974 is available in a 3 x 3 mm, 16-pin TQFN package.
For more information, contact Maxim Integrated Products, 120 San Gabriel Dr., Sunnyvale, CA 94086. Phone: (408) 737-7600.
