I Stock 989526318 1580x800 5f4fbbc1eb563

Production Efficiency Starts with the Optimal Crimp

Sept. 8, 2020
Terminals and splices are the foundation for every connection and are vital to your technology performing in any environment. One guiding principle needs to be followed to ensure a good crimp – tool and terminal must come from the same manufacturer.

There are few things in the world of electrical assembly that appear more straightforward than crimping wires to terminals. However, there is much more complexity to the process than meets the eye. Terminals and splices are the foundation for every connection, and getting them right is vital to your technology performing in any environment or application. Download the white paper to learn the importance of using the right tools and techniques for the optimal crimp.

Sponsored

Embedded Mobile Driven by Human Interface

The monitoring of activity for people as operators in a world of M2M communications is moving from a dream to a practical and ubiquitous reality.

RC191xx PCIe Gen7 1.8V Fanout Buffer Family with LOS

The RC191xx (RC19108, RC19104, and RC19102) ultra-high performance fanout buffers support PCIe Gen1-7. They provide a Loss-Of-Signal (LOS) output for system monitoring and redundancy...

The Basics of Voltage Controlled Oscillators (VCOs)

VCOs fill the need for voltage-based frequency control that is required in a number of applications.

Capacitive Sensor with SLG47011 AnalogPAK™

This application note describes the circuitry using the SLG47011 to create a capacitive sensor. Design files are included in the References section.